Things to Keep in Mind After Buying a New Motorcycle

Deep emotion is involved behind buying a new motorcycle for many bikers. Every biker expects a bike bought with great passion to perform well. Due to traffic jams in our country and the high cost of buying a car, the demand for bikes has now increased significantly. After buying a new bike, taking proper care of it is another big challenge. However, a lot of care is needed to maintain the performance of a new bike. It is necessary to keep servicing running according to the correct rules. After buying a new motorcycle, there are many ways you can take care of it. The more carefully you keep your bike, the more its efficiency will increase over time. To ensure a new bike provides good service for a long time, you need to be aware of the necessary aspects. For example, using a good quality security system immediately after buying the bike, taking care of the battery and engine, checking if all auto parts are active, noticing if there are any scratches – all these things need attention. The bike needs to be upgraded on time wherever necessary. This will maintain the bike's longevity. Proper maintenance of a new motorcycle is essential to ensure good performance for a long time. It is very important to be patient after buying a new bike, especially until the break-in period ends. During this time, the engine is completely new. At the beginning of buying a bike, various parts like piston rings, engine valves, cylinder bores, etc., are a bit rough. To overcome this problem, during the break-in period, the bike needs a little more care. For example, driving slowly while controlling speed, not putting too much weight on the bike, increasing oil lubrication in the engine, lubricating the chain, etc. Following these rules will maintain the bike's performance for a long time. Therefore, all bikers need to be a little careful during this time. If you are careful from the very beginning of buying the bike, your engine parts will remain active, and the bike will give good mileage.

Things to keep in mind after buying a new motorcycle

Buy bike accessories
Immediately after buying a new bike, you can customize it to your liking. To keep your bike's outlook stylish, buy bike accessories from Banglamotor or Banshal. Here you will find many types of bike products such as bike stickers, hand grips, locks, helmets, etc. Besides, to maintain the bike's beauty, you can apply shiner cream. This cream will be available at a very affordable price in Banshal. Using it makes the bike look shiny. However, in this case, make sure that these modifications do not violate any law.

To protect the bike's outlook
Every biker wants to keep their bike's outlook beautiful. Use a good quality bike cover to protect your new bike. Over time, the bike's outlook gets damaged due to various reasons. Dust, sun, rain, or scratches can worsen the bike's condition. The bike should not be left in the sun for hours. This will reduce the brightness of your bike. So, buy a good quality bike cover as soon as you buy a new bike. Use poly paper to keep the bike scratch-free. Laminating will protect your bike's outlook and prevent any damage to its color. Sun and rain have a bad effect on bikes. To avoid this damage, ceramic coating can be used on the bike. This coating will keep the bike scratch-free, just like laminating.

Use digital security system
Bike safety must be considered first. After buying a new motorcycle, its safety must be ensured. It is also good to use a good quality electronic security device, disc lock, or security alarm. Various good quality locks are available in the current bike market. Additionally, modern digital security systems can be used on bikes. This will provide more security.

Battery care is needed
The bike's battery plays an important role in ensuring smooth bike riding. Therefore, after buying a new bike, proper care of the battery must be taken from the beginning. No work that harms the battery should be done. Make sure the motorcycle's terminals are clean and not left loose. Regularly check the battery fuse. Be aware if the battery is leaking.

Keep bike brakes active
It is extremely important for the bike's brakes to be active to ensure your life's safety. After buying a new motorcycle, taking proper care of its brakes is most important. Care must be taken to prevent water from entering the drum brake. If sand or mud remains in the disc brake for a long time, it can become inoperable. Therefore, regularly clean these parts. Pay attention to whether the front disc brake pads are in place.

New bike engine care
It is normal for a new motorcycle's engine to heat up quickly. The reason for this is that new bikes are initially driven at low RPMs, so the engine heats up quickly. However, if the temperature rises abnormally high, you need to seek help from your nearest servicing center. In the initial period after buying a new motorcycle, the break-in period continues. As a result, a little more fuel is consumed. However, after this period ends, fuel consumption returns to normal. Additionally, to avoid extra engine problems, good quality fuel must be used.

Maintain the break-in period
After buying a new bike, the break-in period must be maintained properly. This is a time when the engine and its various parts are completely new. Therefore, it does not perform fully and actively. Some parts like piston rings, valves, and cylinder bores are quite rough, and lubrication is not proper. During this time, the bike must be driven slowly, and speed must be controlled until the break-in period ends. As soon as this period ends, the bike starts running at a good speed and also gives good mileage. Lubrication starts working in all auto parts of the bike, and riding comfort increases. Therefore, all bikers need to be patient during this break-in period. After this specific period ends, your bike will start running normally again. So, during this time, you have to ride the bike by following several rules.

It is important to be careful about some important things after buying a new motorcycle

• The rules described in the motorcycle manual must be followed. It is necessary to know information such as what grade of engine oil to use or after how long to change it.
• Get servicing done after a specific period. This will increase the bike's performance.
• New bikes sometimes turn off. In that case, check if the air filter and plug are clean.
• If any problem occurs with the bike, seek help from an authentic servicing center.
• It is important to wash the bike regularly through professional service. Keeping the bike clean increases its efficiency and riding comfort.
• If you want to modify the bike with stickers of your choice, make sure to laminate the bike with poly paper first. Then, it is better to apply stickers on it. This will prevent damage to your bike's original color.
• Use good quality scratch remover to maintain the bike's beauty.
• After buying a new bike, it is best to get a servicing done every 700-1000 kilometers. Additionally, regular servicing every three months keeps the bike active and provides good performance.
• Good quality engine oil must be used.

Finally, after buying a new motorcycle, the important thing to note is to control the speed. Many riders make this mistake. There are many who, as soon as they buy a new bike, start riding it continuously at high speed day and night. Due to this reckless behavior, the new engine wears out, and the remaining parts of the bike are adversely affected. If one starts driving at excessively high speeds from the beginning, its performance is quickly disrupted. Those who have newly learned to ride a bike must be aware of this. To ride safely, it is necessary to use a good quality helmet. Get a license as soon as you buy a new bike. This will help you avoid any unexpected legal problems. To maintain the efficiency of a new bike, you must seek help from a certified servicing center.

Frequently Asked Questions about Buying a New Motorcycle

1. How do I protect the bike's outlook? - Use poly paper to keep the bike scratch-free. Laminating will protect your bike's outlook and prevent any damage to its color. Sun and rain have a bad effect on bikes. To avoid this damage, ceramic coating can be used on the bike. This coating will keep the bike scratch-free, just like laminating.

2. How do I ensure the safety of a new bike after buying a new motorcycle? - It is best to use a good quality electronic security device, disc lock, or security alarm to ensure bike safety.

3. How important is it to maintain the break-in period after buying a new motorcycle? - After buying a new bike, the break-in period must be maintained. Because this is a time when the engine and its various parts are completely new. Therefore, it does not perform fully and actively.

4. How important is it to buy accessories after buying a new motorcycle? - Immediately after buying a new bike, you can customize it to your liking. To keep your bike's outlook stylish, buy bike accessories from Banglamotor or Banshal.

5. Where can shiner cream be found at an affordable price? - Shiner cream is available at a very affordable price in Banshal.